A DTS 5.1 Matrix hybrid of the DSBD and 24/96 AUD sources. The files are DTS encoded wavs, simply burn them as you would a normal audio-cd. Then play this cd in a DTS-capable DVD player (either on-board decoder or pass through, most newer DVD players have at least pass-through).
More On DTS:
Today's audio standards are moving towards multi-channel
sound, like DTS and Dolby Digital. While the Audio-CD
standard (Red Book) hasn't changed to accommodate these
new sound formats, it is still possible to go around the
specification and to put a 5.1 surround recording on a
regular Audio-CD. To play a DTS-Audio-CD you must connect
your DVD/CD player via a digital cable (optical or coaxial)
to your DTS Dolby-Digital receiver. It is not 100% sure
that your receiver will recognize a DTS-Audio CD, so the
first time you're trying to playback a DTS-Audio-CD you
must do a test to determine if it can. Begin with the
volume very low, start the disc and rise the volume
gradually. NEVER listen to a DTS-Audio-CD through the
analogue audio outputs of your CD/DVD player.
Burn them the absolute same way as you would burn any
normal Audio-CD from .flac files.
Make sure you mark this as a DTS CD disc that's not for
playback in an Audio-CD player, as the digital noise will
be at full volume level and speaker damage could result.
There is a DTS decoder for Winamp at
I've found it works best when using the DirectSound output
^Phil plays Big Brown, *1st time played
Matrix: DSBD and AUD tracks mixed in Sony Vegas by Stitt (firstname.lastname@example.org)
Track 1 = DSBD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Forward
Track 2 = AUD at -0.0 db (set 1) and -1.5 db (set 2) at 38% Backward
Track 3 = DSBD cutoff at 116kh for LFE (same levels as Tracks 1 & 2)
Surround Master = -2.2 across the board
Mono Channels output at 16/44
DTS encoded with Surcode DVD DTS